SWITCHY – Your Camper’s Switching Hub
Eight channels, DC and AC
Four DC channels switch up to 30A each, four AC channels up to 10A or 2300W at 230V. Switchy detects 12V and 24V systems by itself, there is nothing to set.
Technical details
Easy control for every device
Switch up to eight devices individually, from lights and pumps to sockets and the boiler, at a wall switch, on the SmartKnob or in the dashboard.
Safety when on shore power
Switchy automatically detects when you connect to campsite power. It can switch loads like the hot water boiler on or off by itself, exactly as you configure it.
Protected and certified
If something is wired incorrectly or the campsite supply has a fault, Switchy warns you and shuts the affected channels off. It also protects itself against over- and undervoltage, reverse polarity and overheating, and is tested to the relevant EU safety standards.
Easy installation for everyone
All wires are connected with clever, tool-free push connectors, so no crimping, no cable chaos and easy to set up.
For big and small appliances
Whether it is little lights or large appliances like a hot water boiler, Switchy handles both. You can even control electric lifting beds, including those with 230V motors.
Extras for your lifting bed
Move your lift or slide-out bed with the SmartKnob. Two contacts can be used as end stops, so the bed stops where it should instead of running against its limit.
Name your devices clearly
Give each channel its own name, such as kitchen light, bed up or water pump, so you always know what you are switching.
Everything in view, every time
See the switching state of all devices in real time on the SmartKnob and in the dashboard, with no extra app needed.
Smart energy savings
Switchy itself draws 56mA at 12.7V, roughly 1.3Ah a day. The relays are pulled in at full current and then held with a reduced holding current, so consumption stays low no matter how many channels are on.
Effortless pairing
Switchy pairs with the SmartKnob in seconds. Display, light and sound confirm immediately when everything is ready.
Keeps itself up to date
Updates are installed through the dashboard, with no extra app and no complicated steps.
